Swiveling, smooth-rolling independent wheel set threaded into a durable 90 degree corner support bracket (some assembly required). Lifts and protects display corners approximately 2 inches above the floor. Two styles to choose from: locking and non-locking. Simply friction fit each clear corner support bracket to attach to corrugated bottom edges. Makes almost any fixture or corrugated display easily moveable. Optional locking style can be used to both mobilize or immobilize a display.
  • Holds up to 1/4" (A-Flute) corrugated 2" off the floor
  • 1-9/16" wheel diameter with 5/16-18 x 3/4" long plated steel stem
  • Reinforced corner bracket having dimensions of 3-1/2" x 3-1/2" x 1-1/4" height
  • Supports a maximum of 75 lbs. per swivel caster (i.e. 300 lbs. total distributed weight among 4 swivel casters)
  • Clear polycarbonate corner and black HIPS wheel
  • Packed four complete assemblies per bag
  • Sold only in full bags of four pieces
Unit of Measure

Specifications

Style

N/A Swiveling and Non-Locking

Corner Angle

N/A 90 º

Wheel Diameter

N/A 1-9/16"

Stem Width

N/A 5/16-18"

Stem Length

N/A 3/4"

Stem Material

N/A Steel

Corner Bracket Height

N/A 1-1/4"

Maximum Working Load Limit per Swivel Caster

N/A 75 lb

Total Distributed Weight Among Four Swivel Casters

N/A 300 lb

Corner Color

N/A Clear

Corner Material

N/A Polycarbonate

Wheel Material

N/A High Impact Polystyrene (HIPS)

Wheel Color

N/A Black

Packaged (Per Bag)

N/A Four Complete Assemblies